|
|
|
 Peachtree Woodworking |
8" REACH BENCH HOLD-DOWN CLAMP - JORGENSEN # 1716-160
• Peachtree Woodworking
• Cast iron hold down provides a fast, effective way to control stock on the bench top..
• 8" reach; 16" length; 5/8" diameter..
• Ideal for bench top carving, sanding, routing etc..
• Quick release, positive control..
• Requires pre-drilling..
more ... |
$32.99
$22.99
 |
|
 James Morton WMS-5 |
Bessey WMS-5 Magnetic Hold Down Square-160
• James Morton WMS-5
• High quality rare earth and ferrite magnets for supreme holding power.
• Designed for fast, easy set-ups.
• Holds work firmly at 45, 90 and 135 degree angles.
• To disengage the clamp, tap the backside..
• The 8" clamp has a 4" reach..
more ... |
$18.78
$13.56
|
|
 PriceCutter |
BENCH HOLDFAST 8"-160
• PriceCutter
• From small boards to huge blocks, these bench holdfasts make frequent clamping a snap..
• Simply drill a 3/4" hole to accommodate the holdfast and drop it in place..
• Give the head a firm tap with a mallet and you are ready to go..
• Designed to be mounted flush to the work surface.
• This keeps the work surface clear of obstructions when not in use.
more ... |
$11.99
|
|
 Woodstock International D2725 |
Woodstock International H0878 36" Aluminum T-Slot Track-160
• Woodstock International D2725
• 36" long.
• Convenient hold-down system puts clamping pressure anywhere along the flush-mounted T-Slot Track.
• 3/8" deep x 3/4" wide.
• Designed to be mounted flush to the work surface.
• This keeps the work surface clear of obstructions when not in use.
more ... |
$7.95
$6.42
|
|
 Woodstock International D2724 |
Woodstock International H0877 24" Aluminum T-Slot Track-160
• Woodstock International D2724
• 24" long.
• Convenient hold-down system puts clamping pressure anywhere along the flush-mounted T-Slot Track.
• 3/8" deep x 3/4" wide.
• Casting has orange baked-enamel finish, all hardware plated-steel.
• Lightweight.
more ... |
$5.95
$5.03
|
|
 James Morton WMS-4 |
Bessey WMS-4 Magnetic Hold Down Square-114
• James Morton WMS-4
• High quality rare earth and ferrite magnets for supreme holding power.
• Designed for fast, easy set-ups.
• Holds work firmly at 45, 90 and 135 degree angles.
• Vacuum base.
more ... |
$15.90
$15.90
|
|
 Adjustable Clamp 23530 |
Adjustable Clamp 23530 Pony Light-Duty Bench Vise with Swivel Base-117
• Adjustable Clamp 23530
• 3-1/2-inch jaw width with 3-inch maximum opening capacity.
• Swivels a minimum of 270 degrees on square four-hole base.
• Sturdy steel jaw faces, forming horn and permanent pipe jaws.
more ... |
$27.36
$26.01
|
|
 James Morton MGC-1 |
Bessey MGC-1 Magnetic Ground Clamp, 250 AMP-140
• James Morton MGC-1
• Utilizes a spring loaded electrode that secures ground to work surface.
• Stud assembly allows ground wire to rotate 360 degrees, free of work area.
• Convenient handle for easy gripping.
more ... |
$25.69
$18.49
|
|
 Wilton 63500 |
Wilton 63500/3VB Holding Device-160
• Wilton 63500
• Portable.
• 360 degree swivel base.
• 180 degree head tilt.
more ... |
$49.00
$31.40
|
|
![Bench Clamps: Woodmark 3/4" Round Bench Dogs]() Woodmark BD-01 |
Woodmark 3/4" Round Bench Dogs-
• Woodmark BD-01
• 3/4 inch Round.
more ... |
$16.95
$15.99
|
|
page 2 from 7
|
|
|
