|
|
|
 Kreg KLBK |
Kreg KLBK Large Bench Klamp System-115
• Kreg KLBK
• Keeps joints flush while you drive screws.
• Station pivots 360 degrees for all pocket hole needs.
• Attach plate to workbench and insert clamp to secure your work.
• Ideal for routing and sanding jobs.
• Measures 3-by-4-by-1/4 inch (L x W x H); backed by 30-day warranty.
more ... |
$54.99
$45.69
 |
|
 Skil 3100-06 |
Skil 3100-06 X-Bench Clamping Kit Accessory-108
• Skil 3100-06
• Make the most of the X-Bench with this nine piece clamping kit.
• Two spring clamps.
• Six Wedge dog peg clamps.
• Storage bag can be hung on the X-Bench so clamps are always close at hand.
• Lightweight.
more ... |
$34.68
Too low to display
|
|
 Kreg KBK |
Kreg KBK Bench Klamp System-118
• Kreg KBK
• Keeps joints flush while you drive screws.
• Station pivots 360 degrees for all pocket hole needs.
• Attach plate to workbench and insert clamp to secure your work.
• Hold down clamp for pocket hole joinery and many other applications.
• Requires pre-drilling..
more ... |
$34.99
$29.86
|
|
 Kreg KBK-IP |
Kreg KBK-IP Kreg Bench Klamp Insert Plate-131
• Kreg KBK-IP
• Bench clamp insert plate quickly adds multiple clamping locations to your workbench.
• Designed specifically to work with the Kreg Bench Klamp.
• Made of thick, hard-anodized aluminum.
• Includes all mounting hardware and instructions; easy installation.
• 2-1/2-inch jaw opening capacity for holding a variety of materials.
more ... |
$9.99
$9.95
|
|
 Adjustable Clamp 24545 |
Adjustable Clamp 24545 Pony Light-Duty Bench Vise with Swivel Base-117
• Adjustable Clamp 24545
• 4-1/2-inch jaw with 4-1/2-inch maximum opening capacity.
• Swivels a minimum of 270 degrees on square four-hole base.
• Sturdy steel jaw faces, forming horn and permanent pipe jaws.
• Casting has orange baked-enamel finish, all hardware plated-steel.
more ... |
$44.43
$28.11
|
|
 Woodstock International D2725 |
Woodstock International H0878 36" Aluminum T-Slot Track-160
• Woodstock International D2725
• Portable.
• 360 degree swivel base.
• 180 degree head tilt.
• Vacuum base.
more ... |
$6.42
|
|
 Woodstock International D2726 |
Woodstock International H0879 Hold Down Clamp for T-Slot Track-160
• Woodstock International D2726
• Cast iron hold down provides a fast, effective way to control stock on the bench top..
• 4 1/2" reach; 8" length; 5/8" diameter..
• Ideal for bench top carving, sanding, routing etc..
• Quick release, positive control..
more ... |
$3.49
|
|
 Wilton 63500 |
Wilton 63500/3VB Holding Device-160
• Wilton 63500
• 3" serrated jaws for steadfast clamping.
• Table clamp mounts solidly on worktables up to 2 inches thick.
• Double guide bars for positive clamping.
• Made with plated steel for longer tool life.
more ... |
$49.00
$24.00
|
|
 Peachtree Woodworking |
4 1/2" REACH BENCH HOLD-DOWN CLAMP - JORGENSEN # 1708-160
• Peachtree Woodworking
more ... |
$18.99
$11.99
|
|
 Adjustable Clamp 13025 |
Adjustable Clamp 13025 Pony Light-Duty Clamp-on Vise-160
• Adjustable Clamp 13025
more ... |
$19.50
|
|
page 1 from 8
|
|
|
