|
|
|
|
|
 Bostitch U/CPACK3 |
Factory-Reconditioned Bostitch U/CPACK3 3-Tool Compressor Combo Kit-128
• Bostitch U/CPACK3
• Factory reconditioned kit includes 2-1/2 In. 16 gauge finish nailer, 1 In. 18 gauge finish stapler, 1-1/4 In. 18 gauge brad nailer.
• Includes factory reconditioned CAP60P-OF 2.0 HP (Peak) oil-free compressor.
• Includes 1/4 In. x 40 Ft. heavy-duty airline with MPT fittings.
• Includes a contractor's canvas tool bag.
• 1-Year Limited Warranty.
more ... |
$310.00
$169.99
 |
|
 Dremel 3956-02 |
Dremel 3956-02 MultiPro Super 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 77 Accessories-160
• Dremel 3956-02
• Rotary tool with 77-piece accessory kit and case.
• Corded tool, variable speeds from 5,000 to 35,000 rpm; quick-change collet.
• Easy to grip, rugged plastic housing and durable plastic case.
• Includes rotary tool, 75 bits, two clamps, and 36-inch long flexible shaft accessory.
• 10 pounds; 5-year warranty.
more ... |
$150.86
$82.78
|
|
 Skil 2887-05 |
Skil 2887-05 18-Volt Cordless 2-Speed 3/8-Inch Drill/Driver w/Bit Index, 2 Batteries, Charger, and Case-160
• Skil 2887-05
• 300 inch/pounds of torque for heavier household fastening applications.
• 0-400/1,250 rpm for controlled starts and fast drilling.
• 3/8" Keyless chuck for quick bit changes.
• On-tool bit index for easy-access storage.
• Fuel gauge indicator for optimal power usage.
more ... |
$183.92
$82.55
|
|
 Bosch PR20EVSK |
Bosch PR20EVSK Colt Palm Grip 5.7 Amp 1 Horsepower Fixed Base Variable Speed Router with Edge Guide-160
• Bosch PR20EVSK
• Variable-speed palm-grip router kit; soft-start and quick-lock systems.
• 5.7 amp motor with 15,000 - 35,000 rpm; depth adjustment system and finger support pockets.
• Aluminum construction and soft-grip.
• Includes palm router, drop-forged wrench, collet, fixed base, straight-edge guide, case.
• 11.8 pounds; 1-year warranty.
more ... |
$220.00
$98.99
|
|
 Weller WES51 |
Weller WES51 Analog Soldering Station, Power Unit, Soldering Pencil, Stand and Sponge-115
• Weller WES51
• Designed for continuous production, rework, and repair of through hole, SMT boards, most ground planes, and multi-layer boards.
• Wireless temperature lockout prevents operator from raising temperature to levels higher than specified for the board or component.
• Station automatically powers down after 99 minutes of inactivity to prolong tip life and save power.
• Pencil is fitted with non-burnable silicone rubber cord for added safety, and pencil uses ET series tips.
• Slim, comfortable pencil reduces operator fatigue.
more ... |
$124.95
$86.00
|
|
 Hitachi NT50AE2 |
Hitachi NT50AE2 3/4-Inch to 2-Inch by 18 Gauge Brad Nailer-156
• Hitachi NT50AE2
• Finish nailer accepts 5/8- to 2-inch 18-gauge brad nails; selective actuation switch offers bump fire or sequential fire modes.
• Depth of drive dial for a professional finish; lightweight aluminum body and composite magazine reduces user fatigue.
• Tool-free, easy-to-clear nose for quick and simple nail extraction should a nail jam during use.
• Includes safety glasses, air fitting, hex bar wrenches, carrying case, no-mar tip.
• Measures 10-inches by 9.25 inches (LxH); lightweight and well-balanced at 2.2 pounds; 5-year warranty.
more ... |
$148.05
$72.68
|
|
 Porter-Cable 690LR |
Porter-Cable 690LR 11 Amp Fixed Base Horsepower Router-160
• Porter-Cable 690LR
• Powerful 1-3/4 HP motor generates 27,500 RPM for easy routing.
• Easy, precise coarse adjustments via the cam lock lever.
• Dust-sealed switch and ball bearings increases durability.
• Measures 12 x 5.5 x 8-5/8 inches (LxWxH) and weighs 8 pounds.
• Includes router motor, fixed base, 1/4- and 1/2-inch collets, collet wrenches, and operating manual.
more ... |
$287.46
$94.00
|
|
 DeWalt DC385(type 2) |
Bare-Tool DeWalt DC385B 18v. Cordless Reciprocating Saw Contractors Special (Tool Only, No Battery)-160
• DeWalt DC385(type 2)
• Lever-action keyless blade clamp for fast and easy blade changes.
• 0 to 3,000 SPM for faster cutting speed.
• Electric brake for greater control.
• 4-position blade clamp allows for flush cutting and increased versatility.
• 1-1/8" stroke length for faster cutting speed.
more ... |
$66.95
|
|
 DEWALT DC750KA |
DEWALT DC750KA Heavy Duty 9.6-Volt 3/8-inch Cordless Drill/Driver Kit-160
• DEWALT DC750KA
• Heavy duty 3/8-foot single sleeve ratcheting chuck for tighter bit gripping ability.
• Dual speed range (0-to-300 RPM and 0-to-1,100 RPM).
• 15-position adjustable clutch for added control.
• Weighs only 3.4 pounds; backed by a manufacturer's 1-year warranty.
• Included with this drill/driver: two batteries, charger, bit, and a heavy-duty carrying case.
more ... |
$190.20
$69.99
|
|
 Hitachi C10FCE2 |
Hitachi C10FCE2 10-Inch compound miter saw-160
• Hitachi C10FCE2
• Carbide blade included.
• 15 Amp motor.
• Large pivoting fence.
• 5,000 rpm.
• Bevel angle 0-45, miter range 0-52.
more ... |
$263.34
$119.99
|
|
page 4 from 400
|
|
|
|
|
