|
|
|
|
|
 CarveWright Carvewright N01 |
CarveWright N01 Woodworking System-141
• CarveWright Carvewright N01
• Unlimited Design Capabilities - The CarveWright woodworking system is an inexpensive way for anyone to create complex carvings. From signs, reliefs for mantles and cabinetry to friezes and furniture. This amazing machine has endless possibilities!.
• Easy to Use - The CarveWright’s onboard computer makes using the machine quick and easy. Projects created with CarveWright design software are saved to a memory card that slides right into the machine. The LCD screen walks you through the setup..
• Compact -The CarveWright has a patented rising head and feed through configuration allowing it to handle work pieces up to 14.5" wide, 5" thick and essentially any length desired while being small enough to fit on a desk!.
• Simple - You don’t have to be a master craftsman, anyone can understand the point-and-click format of the CarveWright Project Designer software. Our software has all of the power of a complex CAD package but with the ease of use of a paint program..
• Design Elements Ready to Use - Arrange, combine, even alter elements from our extensive 3D pattern library. Easily raster, outline, or Center-Line* text using the fonts already on your computer for a variety of effects..
more ... |
$1,899.99
$1,699.99
 |
|
 Palmgren 49181 |
Palmgren 49181 MTC18 Compound Milling Table-76
• Palmgren 49181
• 18-inch compound milling table with rotary dials that are graduated in 0.02 mm increments.
• Handles at each end of the 18-5/8-inch table surface make it possible to use the table from either side..
• Solid, cast iron and steel construction; slides have adjustable gibs to maintain accuracy.
• Table top features two 9/16-inch T-slots, 2-3/8-inch center-to-center.
• Weighs 63 pounds.
more ... |
$398.40
$286.99
|
|
 JET 350018 |
Jet JMD-18 / 350018 Milling/Drilling Machine-160
• JET 350018
• Hinged belt cover allows faster speed changing.
• 9-1/2-by-31-3/4-inch worktable.
• 2 hp, 1 phase, 230-volt only motor.
• Heavy-duty tapered roller bearins support the spindle.
• Stand not included.
more ... |
$2,199.00
$1,849.00
|
|
 Flex |
Flex LWW2106VR Edge Milling Machine-129
• Flex
• Head tilt of 45 degrees both ways; head swivel of 90 degrees both ways.
• Meehanite casting.
• Motor: 5 HP, 220V, 3-phase, 1725 RPM.
• Table travel of 28" longitudinal, 15-1/4" cross, 13-1/4" vertical.
• Variable speed range: 90-3800 RPM.
more ... |
$1,449.99
|
|
 Grizzly |
Grizzly G0559 Large Milling Machine 12 x 54-160
• Grizzly
• One-piece cast iron column for added support.
• Quick slide latch allows faster belt adjustment to change spindle speeds.
• Tapered base allows for easier clean-up.
• Heavy-duty power downfeed with manual fine feed.
• 360° head swivel and extra large work table.
more ... |
$10,950.00
$10,950.00
|
|
 WMH Tool Group 350017 |
Jet 350017/JMD-15 Milling/Drilling Machine-160
• WMH Tool Group 350017
• X-axis powerfeed installed.
• 2HP, 1Ph, 115/230V motor (Prewired 230V).
• 12.25" of ram travel.
• Collet capacity is 1/8-7/8 inches.
• 8 spindle speeds ranging from 80-2720 RPM.
more ... |
$1,625.00
$1,449.00
|
|
 WMH Tool Group 690006 |
Jet 690006 JTM-2 Vertical Milling Machine with X-Axis Powerfeed, 115/230-Volt 1 Phase-123
• WMH Tool Group 690006
• X-axis powerfeed installed.
• 2HP, 3Ph, 2-speed, 230V motor.
• 12.25" of ram travel.
• Collet capacity is 1/8-7/8 inches.
• 16 spindle speeds ranging from 80-5440 RPM.
more ... |
$8,025.00
$6,598.57
|
|
 WMH Tool Group 690019 |
Jet 690019 JTM-1 Vertical Milling Machine with X-Axis Powerfeed, 230/460-Volt 3 Phase-123
• WMH Tool Group 690019
• Vertical milling machine with smaller size ideal for home, repair, and small maintenance shops.
• 5 spindle speeds from 240 to 1,150 RPM; 10-1/2 inches of ram travel.
• 1.5 HP 115/230-volt motor; chrome-finished, large-diameter quill.
• Includes one-shot lubrication system, way covers, draw bar, and tool box with tools.
• Locks on all movable surfaces; handles up to 500-pound work piece.
more ... |
$8,025.00
$6,598.57
|
|
 WMH Tool Group 690036 |
Jet 690036 JVM-836-1 Vertical Milling Machine-123
• WMH Tool Group 690036
• Work piece can be up to 500 pounds for a wide variety of milling applications.
• 1.5HP, 3Ph, 230V motor for optimal milling power.
• 10-1/2 inches of ram travel for maximum versatility.
• Collet capacity is 1/8-7/8 inches.
• 10 spindle speeds ranging from 120-1550 RPM.
more ... |
$5,399.00
$5,399.00
|
|
 WMH Tool Group 690038 |
Jet 690038 JVM-836-3 Vertical Milling Machine, 230-Volt 3 Phase-123
• WMH Tool Group 690038
more ... |
$5,399.00
$5,399.00
|
|
page 1 from 5
|
|
|
|
|
